Here are the requirements for those positions:
1. Read Blue prints and lead a team to set up Bundles or Sections Correctly and efficiently.
2. Keen eye for Safety of self and those in your work areas.
3. Use Cranes to move heads, bundles, sections, plenums, drives, and all shape and sizes of structure with overhead
cranes, forklifts, and dollies.
4. Experience installing Heads, securing heads, keeping Headers Level during Tube installation and setting projection.
5. Tube expansion experience including setting up machines and taking measurements to confirm minimum and
maximum tube wall reduction.
6. Selecting the proper thread lubricants as needed for Plug holes and studs as needed and required.
7. Installation of plugs and hydro covers as well as Hydro pressure testing gages.
8. Conducting soap bubble and helium testing of bundles or sections including proper pressurization of bundles or
sections.
9. Hooking up hoses for hydro testing and pumping up the vessel per print instructions.
10. Trouble shoot for plug and tube leaks after dropping pressure.
11. Hydro Testing.
12. Dry out of bundles or sections after hydro testing. Rocking the bundle with cranes to evacuate standing water.
13. Use of impact wrenches and manual torque wrenches. Use of Tube mics.
14. Ability to positively lead a ground of workers as a team from 2 to 8 team members at any given time.
15. Work at a consistent pace actively moving projects along per job work instructions.
16. Ability to teach the above activities and task to others that do not have those experiences.
17. Ability to trouble shoot and find causes for trouble and put solutions in place.
18. Not a requirement but bonus for Drive, Gear Drive, Fan, and Plenum Assembly experience plus run-in and vibration testing of air cooled heat exchangers.
HEADER PLANER MILL MACHINIST - $19+ (depending on experience) - Channel Location
Night Shift – 1 Position
Set up and operate planer type milling machine that moves work piece back and forth against rigidly held rotating cutters to mill work pieces. Study blueprints or layout on work piece to determine machine set up, and sequence of machining operations. Lift work piece manually or with an overhead crane to position on machine bed. Secure work piece in holding fixture and verifies position. Select cutting tool and mounts it in spindle. Adjust controls to set feed rate, speed of cutting tool, and depth of cut. Turn controls to position cutting tool relative to work piece, starts machine, and engages automatic feed. Observe operation, stops machine to change cutting tool, and adjust controls. Verify conformance of work piece to finished specifications by using measuring instruments to assure accuracy. Maintains production record of parts and jobs fabricated as required by the
Department Manager. Remove work piece from machine bed. Regular attendance, ability to arrive at work punctually, ability to work on–site, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently,
ability to work in a fast-paced environment, ability to interchange with others in the department. Ability to operate pneumatic and electric 4 ½” and 9” grinders Safely and Efficiently. Ability to operate pneumatic, cordless impacts. High School Diploma or
General Education degree (GED) preferred. Prior experience preferred, but not required.
HEADER SUB ARC/LANCE/END BLOCK WELDER - $19+ (depending on experience) - Channel Location
Day Shift – 2 Positions
Night Shift – 4 Positions
Ability to position header at machine clamping using an overhead or jib crane; turn cranks or pushes buttons to align electrode on welding head over the weld joint. Ability to load reel of electrode wire onto machine and threads electrode wire from reel through feed rolls and welding head; turn welding head to set the specified angle of electrode. Fill hopper with specified flux and direct nozzle or gravity feed over weld line. Turn knobs to set current, voltage, and slope, and synchronize feed of wire and flux with speed of welding action. Ability to observe meters and gauges along with observing the weld action for compliance with procedures. Visually examine welds for adherence to specifications; grind welded surfaces as needed. Ability to operate pneumatic and electric grinders. Ability to use and utilize levels. Adjust machine setup to vary size, location, and penetration of bead; layout, fit, and tack work pieces together. Preheat work piece with hand torch or heating furnace; remove surplus slag, flux, and spatter. Ability to remove metal with carbon arc gouger to make repairs if necessary. Maintains production record of parts and jobs fabricated as required by the Department Manager. Regular attendance, ability to arrive at work punctually, ability to
work on–site, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. High School Diploma or equivalent preferred. Must pass American Society of Mechanical Engineering 1g Saw Plate Test.
HEADER WELDER – COMBINATION A (must have tig/stick experience) - $22-25/hr (depending on experience)
Day Shift – 2 Positions – Channel Location
Night Shift- 3 Positions- Channel Location
Welders must be proficient in blueprint reading for layout. Must be able to correctly fit and weld fabricated and forged
components to assemble Header components with Shielded Metal Arc Welding, Gas Metal Arc Welding, and/or Gas Tungsten Arc Welding Process. Position, align, and fit components together and tack-weld parts to secure in position for welding using correct welding process and procedure. Ability to set-up welding equipment for use of certain types of material. 3-5 years code welding experience required. Test requirements: pass a 2G plate test with the GTAW root pass and SMAW fill and
cap.
HEADER FITTER WELDER- $25+ (Depending on Experience)
Day Shift- 1 Position- Channel
Night Shift- 1 Position- Channel
Proficient in blueprint reading for layout. Must be able to correctly fit and weld fabricated and forged components to assemble Header components with Shielded Metal Arc Welding, Gas Metal Arc Welding, and/or Gas Tungsten Arc Welding Process as required. Position, align, and fit components together and tack-weld parts to secure in position for welding using correct welding process and procedure. Set up welding equipment for the type of material being used. Hammer wedges and drift pins. Grind rough edges, surplus weld, or scale, using portable grinder. Position and turn clamps, and bolts using hand or wrenches. Position work pieces manually or by using overhead or jib cranes. Straighten warped or bent parts with a straightening press. Proficient with a
cutting torch and/or plasma cutter. Must be proficient in reading and the proper execution for measuring devices such as tape measures, squares, levels. Maintains production record of parts and jobs fabricated as required by the Department Manager. Regular attendance, ability to arrive at work punctually, ability to work on–site, ability to work overtime. Ability to work cooperatively
with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive
management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department.
HEADER - BLASTER/PAINTER - $17/hr
Day Shift– 3 Positions – Channel location
Night Shift- 3 Positions- Channel
Abrades surfaces of metal or hard composition objects to remove adhering scale, sand, paint, grease, tar, rust, dirt and to impart
specified finish. Shovel or pours abrasives such as sand, grit, or shot of specified grade into machine hopper. Select premixed
paints, or mixes required portions of pigment, oil, and thinning and drying substances to prepare paint that matches specified colors. Ability to prep product prior/ post painting. Must be able to us a power spray guy. Must pass Pulmonary Function Test (PFT); must be fitted and able to wear respirator. Physically active & must be able to lift to 50 lbs.
HEADER GRINDER-$19/hr.+Night Shift- 1 Position- Channel Location
Grind and smooth surfaces of Headers or Header components. Position work pieces by using overhead or jib cranes. Examine surface of work piece for defects. Replace worn abrasive disks, wheels, and die grinder bits according to specifications. Pull trigger to start power tool, move it over surface of work piece to remove scratches, laminated metal, excess weld material, and burrs. May chip or grind out pits or cracks. Remove machining chips from inside of header. Maintains production record of parts and jobs fabricated as required by the Department Manager. Operate industrial forklift. Regular attendance, ability to arrive at work punctually, ability to work on–site, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department.
STRUCTURE BEAM/ANGLE LINE OPERATOR - $18+ (depending on experience)
Night Shift – 1 Position- Channel Location
Ability to set up and operate CNC, machine program or machine control monitoring screen to perform various machine functions such as cutting and punching. Determine and select machine procedures, tooling requirements, and control settings. Ability to read and interpret blueprints, material planning sheets, sketches, or related technical data to calculate and create cutting and punching programs following blueprints with minimal material usage. Ability to start machine, monitor displays, as well as machine operation to detect malfunctions; observe and listen to machine operation to detect malfunctions such as worn or damaged cutting tools or punching. Ability to identify correct material use as per Bill of Material (BOM). Minimum one-month
related experience or training; or equivalent combination of education and experience.
STRUCTURE FITTER WELDER - $25+ (depending on experience)
Day Shift- 1 Position – Channel Locaton
Night Shift- 5 Positions - Channel Location
Ability to lay out, fit, and weld fabricated components to assemble structural forms. Proficient in blueprint reading for layout. Selects equipment and plans layout, assembly, and welding; a layout, positions, aligns, and fits components together; positions work pieces manually or by using overhead or jib cranes. Ability to clamp and tack-weld parts to secure in position for welding. Use tape measure, square, combination square, level, and other related hand tools for part fabrication as per blueprints. Perform simple mathematics calculation to find part dimensions. Perform 100% first article inspections (first piece of each fabricated drawing) by visual examine work piece, measure part or hole dimensions or sizes, square, flatness and other drawing
instructions. Set up welding machine and welding gun: assemble/disassemble welding tips and its liner, wire feed and voltage,using arc or gas-shielded arc welding equipment. Repairs products by dismantling, straightening, reshaping, and reassembling parts. Operate cutting torch and plasma torch. Operate small saw machine and iron machine for cutting and coping, notching materials. Transfer or position work pieces manually by using overhead or jib cranes. Examines and feels surface of work piece for defects. Forklift is an advantage to perform tasks. Identify and select different type of materials including different grades of metal for fabrication. Selects grade of abrasive wheel, disk and die grinder bits according to specifications, knowledge of
abrasives, and condition of metal, and attaches to grinder. Ability to pull trigger to start and hold power tool (i.e. chatter gun, die grinder, angle grinder etc.) and move it over surface of work piece to remove weld splatter, high spot, burr, and rust from
surfaces of structure components including scratches, laminated metal and excess weld material. Ability to load trucks manually with lifting equipment. Regular attendance, ability to arrive at work punctually, ability to work on–site, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. Must be able to operate other small machines. Must pass American
Welding Society 2g Plate Test / Canadian Welding Bureau certified. One-year structural fitting experience
recommended.
ASSEMBLY CLASS B - $17+ (depending on experience)
Day Shift- 5 Positions – Channel Location
Removes small quantities of metal to clean parts or to produce close fit between parts using portable grinders and other hand tools. Drills, taps, or reams holes; aligns components, and bolts, screws, or rivets them together using hand tools or portable power tools. Installs moving parts, such as shafts, levers, fan blades, bearings, and work them to test free movement. Bends and installs pipe for lubricating systems; aligns and meshes gears in gearbox to assemble system of gears including drive motors and fan shafts alignment. Operates tube-rolling equipment after training. Conduct hydro testing or assists in testing operation of completed product after training. Prepares final assemblies for shipment, or storage per applicable drawings. Positions parts manually or byuse of overhead cranes or other lifting equipment as appropriate. Prepare tubes or fin tubes for weld tube-to-tube sheet with steam cleaner and/or manual cleaning method. Works with other workers during tube insertion as per assignment. Regular attendance,ability to arrive at work punctually, ability to work on–site, ability to work overtime. Implement and maintain 5S (workplace organization method in the area with good housekeeping manner). Responsible with hand-tools, power tools and/or equipment inthe area on daily basis to ensure cleanliness and functionality at all times. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. This job has no supervisory responsibilities. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonableaccommodations may be made to enable individuals with disabilities to perform the essential functions. Prior experience
preferred, but not required.
ASSEMBLY CLASS A - $19+ (depending on experience)
Day Shift – 3 Positions – Channel Location
Building bundles. Experience with plenums/driver for air cooled heat exchangers. Tube Expansion, Hydro, dry out, N2 Purge. The ability to teach and instruct on all of these tasks. Read blueprints and build bundles/sections by following prints, calculate expansion measurements, read expansion measurements, set up and Adjust Expansion machine/gun settings, Tube expansion, All plug and cover duties including choosing suitable thread lubricant, Soap Bubble Testing, Hydro Static Testing, and preparation for Helium Testing, Over Head Crane and Forklift operation, The ability to detect Safe and Unsafe Acts and the willingness to stop an unsafe act. Communication skills to teach others and to lead others in all Bundle/Section Assembly Task in the Air Cooled Heat Exchanger world, If no Air-Cooled Heat Exchanger experience, Shell and Tube Industry Experience may be adequate, Work on your feet six days per week while lifting, pushing, pulling, bending with as much as 50 lbs. of weight, Rigging knowledge for Overhead cranes and lifting in general, Wear eye, ear, and steel toe foot protection at all times, Use Cell phones only on break times during work shifts. Two years of prior assembly related experience
APPLY IN PERSON WITH RESUME AT:
LLOYD RICHARDS PERSONNEL
4619 S. HARVARD AVE SUITE 105
TULSA, OK 74135
BRING DRIVERS LICENSE AND SOCIAL SECURITY CARD AND RESUME TO APPLY FROM 9:00AM-3:00PM