JOB REQUIREMENTS: Description CARFAIR - COMPOSITE OPERATOR (STARTING
$19.28) Carfair Composites is a leader in fibre-reinforced plastic
(FRP) design and composites technology and has dedicated team members
located in facilities between Winnipeg, MB (Canada), St. Cloud, MN
(USA), and Anniston, AL (USA), Wausaukee, WI (USA) and Gillett, WI
(USA). POSITION SUMMARY The Composite Operator classification consists
of all the manufacturing positions, excluding Paint, Gel and Buff Back
Final Finish. All Composite Operators will be cross trained in multiple
functions and will be utilized in those functions throughout the
facility, based on customer demand. WHAT YOU WILL DO: The following
positions fall under the Composite Operator classification and list a
small portion of the duties performed in those positions: LRTM: Ensure
proper waxing and care of molds/back shells (tape test every time) Use
proper loading techniques to ensure material is placed correctly prior
to injection Install the back shell without the glass falling Properly
use the injection machine - automatic or manual systems Ensure proper
vacuum operation; check/detect/correct leaks TRIM: Properly inspect, use
and care for cutting tools Properly seat part in fixture and clamp in
correct areas for proper tightness Cut to scribe line Read ruler Use
Go/No Go Gauges LAMINATION: Properly assemble and disassemble/clean the
lamination gun Chop or hand lay material in an even coat not using too
much or too little resin Select proper rollers and roll out all air
pockets Keep resin and catalyst filled Identify defects and follow
proper procedure for non-conformance ASSEMBLY: Read route card to
determine what hardware and how many are used. Properly set part before
install. Grind hardware location and, if needed, hardware without
grinding powder coat. Install hardware with proper fixtures using a
plexus gun. SANDABLE FINAL FINISH: Know/use the proper tools and
equipment to ensure the part meets the customer's specifications
Know/use the correct materials for repairing/finishing parts per the
route card Accurately use all gauges, fixtures and locators related to
the job Use proper procedure/techniques when spraying gel over defects
Inspect parts at every stage of the process to identify defects and
correct immediately MATERIAL CUTTING: Know all tools and equipment
related to position and what to use to replicate customer
specifications. Correctly identifies material to use. Accurately use all
gauges, fixtures, and locators related to position. Accurately trace
patterns and cut on pattern lines. Identify & locate correct pattern
required. WHAT YOU NEED TO BE SUCCESSFUL: Prior experience in composites
or similar industry preferred Strong problem-solving ability including
troubleshooting and resolving issues Must be able to stand for prolonged
periods of For full info follow application link. New Flyer is an
EEO/AAP/Female/Minority/Disabled/Vets Employer APPLICATION
INSTRUCTIONS: Apply Online: ipc.us/t/C75F3C29796E4111