Job Posting End Date04-08-2025Please note the job posting will close on the day before the posting end date.Note: This is an onsite position and will be hired either at the Roanoke or New Albany office.Responsible for performing highly technical estimates for Transmission line and substation projects, including very complex projects, in a safe, efficient and economical manner. This position is responsible for complying with defined project scoping and estimating procedures; gathering and integrating estimate and cost information to build & update master estimating cost models and databases; developing criteria for estimation and use of project and portfolio contingency; working with project stakeholders (i.e. project management, engineering, planning, construction, contractors, etc.) to develop, implement and continuously improve scoping and estimating processes; and mentoring and training less experienced Project Estimators.Job DescriptionESSENTIAL JOB FUNCTIONS:
Support project sponsors in development of conceptual, functional and detail estimates; collaborate with engineering, project management, and other stakeholders in the development of the project scope of work; prepare detailed project cost estimates based on the approved scope of work.
Interface with planning, engineering, project engineering/management, outage management, construction, and operating company personnel to identify/initiate, scope, status and follow-up estimate efforts (if necessary). This role includes providing recommendations and guidance to interfacing groups/individuals regarding estimate approach and input requirements.
Develop and analyze historical records of project costs; review and critique designs and specifications for cost effectiveness and suggests alternatives when appropriate.
Adhere to standard processes and procedures for estimating, review estimate basis and assumptions for completeness and reasonableness. Work with functional departments and service organization to develop services labor estimates.
Provide technical direction and guidance regarding estimate approach/development, assumptions/qualifications and resolution of estimate issues.
Assist with maintaining the integrity of the estimating software and associated resource and assembly cost data.
Demonstrate the highest standards of ethical behavior and support the Company's Corporate Compliance Policy.
Demonstrate effective leadership, team building and meeting management skills.
Demonstrate a high-level of confidence in the ability to lead a team and a project to successful conclusion.
Demonstrate outstanding communication skills, both written and verbal, with all stakeholders including team members, sponsors, management and senior management.
Demonstrate an economic and business acumen with an understanding of the Engineering & Design, Procurement, Contracting, Estimating, Construction and Test & Checkout procedures and processes.
Demonstrate strategic thinking, planning, risk assessment and prioritization of project activities and skills.
Demonstrate conflict management skills to resolve disputes and to maximize synergies with an overriding goal to do the "right thing" for the company.
Demonstrate an understanding of scope management.
Be accountable for project assignments. Develop the skills of organizing project activities, delegating project task assignments, setting team requirements and expectations to manage deliverables, and holding team members accountable.
Develop the ability to evaluate and determine the skill sets and capabilities needed of team members to assure project success.
Develop a high level of proficiency and advanced knowledge of construction methodologies. 12) Position may require extended hours to accomplish assigned tasks and meet project requirements and schedules.
MINIMUM REQUIREMENTS:Engineer (SG6): ($72,380 - $90,475)
Has typically acquired 2 or more years of related engineering experience along with a Bachelor's degree in engineering in a program accredited by ABET.
Individuals with a Master's degree in engineering from an engineering program accredited by ABET may be considered for entry into the organization at this level.
ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology.
Acceptable alternative is:
(1) a Bachelor's degree in engineering (non-ABET) plus a Master's degree or PhD in engineering from a university with an ABET accredited Bachelor's program.
Engineering Technologist (SG6): ($72,380 - $90,475)
Has typically acquired 2 or more years of related experience in work activities and projects requiring the application of engineering technology principles; Bachelor's degree in engineering technology in a program accredited by ABET.
A degree in engineering technology is the preferred degree: however, engineering degrees will also be considered.
ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology. Acceptable alternative is (1) a Bachelor's degree in engineering technology (non-ABET) plus a Master's degree or PhD in engineering technology from a university with an ABET accredited Bachelor's program.
Engineer (SG7): ($85,081 - $106,354)
Has typically acquired 4 or more years of related engineering experience along with a Bachelor's degree in engineering in a program accredited by ABET; or 2 years of related engineering experience along with a Master’s degree in engineering from a program accredited by ABET .
Individuals with a PhD in engineering from an engineering program accredited by ABET may be considered for entry into the organization at this level.
Registration as a Professional Engineer (PE) in any U.S. state or Puerto Rico is encouraged and preferred.ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology.
Acceptable alternative is:
(1) a Bachelor’s degree in engineering (non-ABET) plus a Master’s degree or PhD in engineering from a university with an ABET accredited Bachelor’s program. Confirmation is required to ensure the PE obtained in Puerto Rico aligns with NCEES standards.
Engineering Technologist (SG7): ($85,081 - $106,354)
Has typically acquired 4 or more years of related experience in work activities and projects requiring the application of engineering technology principles; Bachelor's degree in engineering technology in a program accredited by ABET.
A degree in engineering technology is the preferred degree: however, engineering degrees will also be considered.
ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology. Acceptable alternative is (1) a Bachelor's degree in engineering technology (non-ABET) plus a Master's degree or PhD in engineering technology from a university with an ABET accredited Bachelor's program.
Engineer Sr.(SG8): ($96,110 - $124,941)
Has typically acquired 6 or more years of related engineering experience along with a Bachelor's degree in engineering in a program accredited by ABET; or 4 years of related engineering experience along with a Master's degree or PhD in engineering from a program accredited by ABET; Registration as a Professional Engineer (PE) in any U.S. state or Puerto Rico is encouraged and preferred.ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology.
Acceptable alternative is:
(1) a Bachelor's degree in engineering (non-ABET) plus a Master's degree or PhD in engineering from a university with an ABET accredited Bachelor's program. Confirmation is required to ensure the PE obtained in Puerto Rico aligns with NCEES standards.
Engineering Technologist Sr. (SG8): ($96,110 - $124,941)
Has typically acquired 6 or more years of related experience in work activities and projects requiring the application of engineering technology principles; Bachelor's degree in engineering technology in a program accredited by ABET.
A degree in engineering technology is the preferred degree: however, engineering degrees will also be considered.
ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology. Acceptable alternative is (1) a Bachelor's degree in engineering technology (non-ABET) plus a Master's degree or PhD in engineering technology from a university with an ABET accredited Bachelor's program
OTHER REQUIREMENTS:Physical demand level is Sedentary.
Demonstrate effective leadership, team building and meeting management skills.
Demonstrate a high-level of confidence in the ability to lead a team and a project to successful conclusion.
Demonstrate outstanding communication skills, both written and verbal, with all stakeholders including team members, sponsors, management and senior management.
Demonstrate an economic and business acumen with an understanding of the Engineering & Design, Procurement, Contracting, Estimating, Construction and Test & Checkout procedures and processes.
Demonstrate strategic thinking, planning, risk assessment and prioritization of project activities and skills.
Demonstrate conflict management skills to resolve disputes and to maximize synergies with an overriding goal to do the "right thing" for the company.
. Demonstrate an understanding of scope management.
Be accountable for project assignments.
Develop the skills of organizing project activities, delegating project task assignments, setting team requirements and expectations to manage deliverables, and holding team members accountable.
Develop the ability to evaluate and determine the skill sets and capabilities needed of team members to assure project success.
Develop a high level of proficiency and advanced knowledge of construction methodologies.
Position may require extended hours to accomplish assigned tasks and meet project requirements and schedules.
Demonstrate the ability to maintain a professional working atmosphere
Candidates will be considered based on their qualifications and the candidate’s ability to work from an approved work location. Although the location is flexible, AEP does not have a presence in all states and localities. The following locations are NOT currently approved for this position: AK, CO, CT, DE, HI, IA, ID, KS, MA, ME, MS, MT, ND, NH, NJ, NM, NV, NY, OR, RI, SD, UT, VT, WY, US Territories or international work locations. AEP will consider qualified candidates who are willing to relocate to an approved work location, at the candidate’s expense, provided the relocation can be completed within a timeframe that meets AEP’s staffing needs. NOTE: All remote work locations require vetting and final approval prior to offer and/or start date. Any work locations listed as preferred or unapproved relate specifically to the requirements for this position and are not necessarily applicable to other posted positions.Hear about it first! Get job alerts by email. Log in to your Candidate Home Account today! If you don't have an account, you can create one.It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.