GENERAL DESCRIPTION:
This role completes advanced electrical repairs and assists in the day-to-day mechanical repairs. In addition, completes advanced repairs and adjustments to electrical devices as well as basic mechanical repairs as necessary. Performs advanced preventative maintenance on all machinery as assigned and successfully troubleshoots mechanical and electrical problems.
RESPONSIBILITIES:
Essential Duties:
Repairs, installs, replaces and tests electrical circuits, equipment and appliances using necessary hand tools and testing instruments.
Inspects and tests electrical lighting, signal, communication, fire alarm, and power circuits and equipment.
Isolates defects in wiring, switches, motors and other electrical equipment, using suitable testing instruments.
Examines and tests elements of electrical systems to locate obvious faults, such as blown fuses, short circuits, broken wires, loose connections, and worn motor brushes.
Replaces faulty switches, sockets, plugs, fuses, insulators, and other simple elements of electrical systems, fixtures and appliances.
Renews circuits either by isolating and cutting out defective wiring and replacing it with new wiring or by splicing ends of broken wires.
Replaces defective equipment parts such as gears, bushings and bearings and other related electrical parts.
As required, estimate materials needed and record time and materials expended on each work order.
Will have minor supervisory duties when General Laborer or Student Worker is assigned to assist in the work of the Electrician.
Install new and additional electrical work, remodeling, etc.
Perform maintenance and repair of motors, relays, magnetic starters, transformers, etc.
Install electrical conduit for installation of new equipment and wiring.
Be capable of installing and interconnecting transformers and repairing, maintaining, altering or installing wiring, cabling, and electrical equipment.
Troubleshoot electrical systems.
As required, be in an on call status and respond to emergencies on campus after hours.
Perform other related duties as assigned.
SKILLS:
Proficient in High Voltage (480/277V), (208/110V) and Low Voltage (24V) Systems and Control Cabinets.
Knowledge of Injection Molding Machines and Auxiliary Equipment – Dryers, Conveyers, Temperature Controllers, Granulators, and Blenders is preferred.
Knowledge of Manufacturing Facility Infrastructure – Air Compressors, Air Dryers, Chilled Water Systems is preferred.
Ability to Troubleshoot PLC Controllers, VFD Drives, Servo Motors, and Heating Components.
Ability to Inspect electrical components, such as Safety Lighting, Exit Signs, Transformers, Circuit Breakers and on various types of manufacturing machinery per NFPA 70, National Electrical Code (NEC)
Identify electrical problems using a variety of testing methods and diagnostic equipment.
Strong ability to read blueprints as well as use of hand tools and power tools.
Ability to work at heights, and confined space conditions as required.
Proficient Project Management skills to meet required project targets and deadlines.
Strong ability to work with key vendors and equipment suppliers.
Strong communication and interpersonal skills to work closely with all team members.
Maintenance and Troubleshooting Service Training will be provided by Arburg – our Injection Molding Machine Supplier
REQUIREMENTS:
Education and Experience
Possess thorough knowledge of codes pertaining to maintenance and installation of electrical systems.
Have and maintain a current Journeyman License and Maintenance Electrician License.
Good oral and written communications skills.
Understand the electrical symbols and interpretation of building and electrical prints.
High school, technical or trade school graduate.
Six (6) years in electrical trade.
Knowledge/Practice of all OSHA/NFPA standards
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Ability to individually lift a minimum of 50 lbs, and be able to, with assistance, move and transport materials and equipment weighing excess of 200 lbs.
Must be able to work in confined spaces requiring bending or stooping for long periods and be able to work from ladders or elevated platforms.
Must be able to work in extreme weather conditions.
Work Environment: Electrician's work covers the full spectrum of buildings and activities.
Required to work in conditioned and unconditioned buildings and spaces, within the central power plant, as well as outdoors in all but the most inclement weather.
BENEFITS:
Competitive base salary with ongoing growth opportunities
Complete benefits package:
Co. paid HSA Medical plan
Co. paid Dental
Co. paid Life
Supplemental Life Insurance
Vision Insurance
Short and Long Term Disability Insurance
Retirement with Company contributions
20 Paid Time Off days per year, plus 9 holidays
Subsidized lunch on-site