FITTER WELDERS $22 HR, Day shift Sapulpa
SHOP HELPERS - Grinding, overhead crane, forklift exp. $16-$17 hr.
CNC MAINTENANCE $22.00 hr. 2-3 Years Exp. Machine tool repair and an emphasis on Fanuc systems. Basic measuring tools, preventive and troubleshooting tasks on NC machines. Electrical, mechanical and hydraulic/pneumatic circuits.
Painter/Bond Rimer/Cleanline Operator -$17 hr, processing parts through the line in preparation for layup and other duties. Assist in priming applications, rack parts for chemical processing, Rack and identify bond prime surface. cleans and preps aircraft parts prior to painting, Sprays specified amount of thickness of primer, bond primers on parts. Mix and thin paints to specified color and consistency. Operate overhead cranes.
CMM PROGRAMMER $20+ hr. DOE
Quality Control Inspector - 2-3 years exp. $18+ hr. DOE. Shop math, and GD and T comprehension and application. Print reading and application. knowledge of ASME 14.5 and AS9102. Demonstrate basic operating Coordinate Measurements Machines/Scanners.
2 Night shift Vessel Welders - must have recent vessel experience $22-$25 Sapulpa
Test: 3G plate test mig and flux
5 Day shift Vessel Welders - must have recent vessel experience $22-$25 Sapulpa
Test: 3G plate test mig and flux
1 Day shift Tig Welders (spools) - must have spool experience $22-$25 Sapulpa
Test: 6G Tig test
2 Night shift Tig Welders (spools) - must have spool experience $22-$25 may also let them know that possible in the future on our bigger pipe we will be doing tig root with a flux fill and cap Sapulpa
Test: 6G Tig test
Day shift: 5am to 3:30pm Monday – Thursday & Friday and Saturdays are overtime.
Night shift 5pm to 3:30am Monday – Thursday & Friday and Saturdays are overtime.
Night shift gets a $2 shift diff.
Welder Structural Steel Mig and Flux core temp to hire positions, pay rate $19.00 + based on work history and experience. (4 years min experience) 6:00am-2:30pm Monday-Friday
HEADER WELDER – COMBINATION A (must have tig/stick experience) - $22-25/hr (depending on experience)
Day Shift- 1 Position
Night Shift – 4 Positions
Welders must be proficient in blueprint reading for layout. Must be able to correctly fit and weld fabricated and forged
components to assemble Header components with Shielded Metal Arc Welding, Gas Metal Arc Welding, and/or Gas Tungsten Arc Welding Process. Position, align, and fit components together and tack-weld parts to secure in position for welding using correct welding process and procedure. Ability to set-up welding equipment for use of certain types of material. 3-5 years code welding experience required. Test requirements: pass a 2G plate test with the GTAW root pass and SMAW fill and
cap.
HEADER FITTER WELDER- $22/hr.+(Depending on Experience)
NIGHT SHIFT- 1 Position
Proficient in blueprint reading for layout. Must be able to correctly fit and weld fabricated and forged components to assemble Header components with Shielded Metal Arc Welding, Gas Metal Arc Welding, and/or Gas Tungsten Arc Welding Process as required. Position, align, and fit components together and tack-weld parts to secure in position for welding using correct welding process and procedure. Set up welding equipment for the type of material being used. Hammer wedges and drift pins. Grind rough edges, surplus weld, or scale, using portable grinder. Position and turn clamps, and bolts using hand or wrenches. Position work pieces manually or by using overhead or jib cranes. Straighten warped or bent parts with a straightening press. Proficient with a cutting torch and/or plasma cutter. Must be proficient in reading and the proper execution for measuring devices such as tape measures, squares, levels. Maintains production record of parts and jobs fabricated as required by the Department Manager. Regular attendance, ability to arrive at work punctually, ability to work on–site, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive
management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department.
HEADER SUB ARC/LANCE OPERATORS - $19+ (depending on experience)
Night Shift – 4 Positions
Ability to weld trunnion to end of headers and positions header using an overhead or jib crane; turn cranks or pushes buttons to align electrode on welding head over the weld joint. Ability to load reel of electrode wire onto machine and threads electrode wire from reel through feed rolls and welding head; turn welding head to set the specified angle of electrode. Fill hopper with specified flux and direct nozzle or gravity feed over weld line. Turn knobs to set current, voltage, and slope, and synchronize feed of wire and flux with speed of welding action. Ability to observe meters and gauges or observes welding action for compliance with procedures. Visually examine welds for adherence to specifications; grind welded surfaces as needed. Adjust machine setup to vary size, location, and penetration of bead; layout, fit, and tack work pieces together. Preheat work piece with hand torch or heating furnace; remove surplus slag, flux, and spatter. Ability to remove metal with carbon arc gouger to make repairs if necessary. Must be able to pass a 1g Saw Plate Sub-Arc and 2g Plate Test. 3 years’ experience required.
HEADER - BLASTER/PAINTER - $20/hr
Night Shift– 1 Position
Read work orders or receive instructions from supervisor regarding painting. Select premixed paints, or mixes required portions of pigment, oil, and thinning and drying substances to prepare paint that matches specified colors. Clean grease, rust, and dirt from product; washes surface prior to painting; may be required to blast parts to prepare for painting; apply masking tape over parts and areas that are not to be coated. Spread drop cloths over floors and cover surfaces that do not require paint with masking tape and paper to protect surfaces during painting. Pour coating liquid into spray container and connects gun to air hose; turn sprayer valves and nozzle to regulate width and pressure of spray. Install specified nozzles in spray guns. Replaces screens and filters; pull the trigger and directs spray onto work surface to apply prime or finish coat using enamel, polyurethane, epoxy, inorganic zinc, and other industrial paints; clean spraying equipment and brushes with solvent. Load and move materials to work and drying areas by industrial forklift, overhead and jib cranes. Maintains production record of parts and jobs fabricated as required by the Department Manager. Perform other routine duties. Set up ladders to perform tasks above ground level. Abrades surfaces of metal or hard composition objects to remove adhering scale, sand, paint, grease, tar, rust, and dirt, and to impart specified finish. Shovel or pours abrasives such as sand, grit, or shot of specified grade into machine hopper. Mask specified areas of object to protect from abrading action. Load parts on racks or in enclosed rooms manually or using industrial forklift or overhead cranes. Turn valves on equipment to regulate pressure and composition of abrasive mixture flowing through nozzle. Start equipment that directs blast or flow of abrasive laden compressed air, gas over surface of parts. Direct nozzle over surface of large parts and manipulates parts under nozzle for specified interval. Examine finished parts to ensure conformance to specifications. Maintains production record of parts and jobs fabricated as required by the Department Manager. Ability to assist painter in simple paint application. Ability to use and interpret DFT measuring equipment. Minimum Five years related experience required. Must pass Pulmonary Function Test (PFT); must be fitted and able to wear respirator. Physically active & must be able to lift to 50 lbs.
STRUCTURE LOUVER FITTER WELDER - $22+ (depending on experience)
Night Shift – 1 Position
Ability to weld fabricated parts of structural metal products in shop, plan sequence of operation and meet quality standards. Obtain specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun; connect cables from welding unit to obtain amperage, voltage, slope, and pulse, as specified by Welding Engineer or Welding Technician and be able to set welding machine wire feed and read blueprints. Must pass 2g and 3g weld test. 2 years welding and fitting experience.
FINTUBE OPERATOR - $24 Operator needs to have at least 5 experience running a McElroy finning
machine.
Night Shift – 1 Position
Ability to set-up and operate finning machines to wrap on or embedded fin strip material on tubes to construct fintubes by reading blueprints, planning sheets, sketches, and related technical data to determine tooling requirements, setup procedures, control settings, and finning methods and sequences. Mount pans then, aligns, and secures pan in machine. Ability to calculate and sets machine controls in relationship to work piece and regulate factors such speed, feed, and coolant flow; start machine and observe and listens to machine operation to detect malfunctions. Ability to feed tubes into the machine and connect other tubes with tube connectors to continue the finning process; adjusts machine feed and speed to fin tubes according to specifications. Verify dimensions of finned tubes for conformance to specifications using gauges, calipers, and ruler. Stop machine to change setup according to required machining sequence or to measure parts for conformance to blueprint specifications; perform oil level checks and clean machine, tooling, and parts. Perform some machine maintenance. Mount finning strips rolls into fin strip machine using overhead crane. Less than high school education; or up to one-month related experience or training; or equivalent combination of education and experience. Supervise employees within the field service department. Directing employees’ work; setting and adjusting hours of work of employees; providing for the safety of the employees; planning the work; determining the techniques to be used; apportioning the work among the workers. Carry out supervisory responsibilities in accordance with policies, procedures, and applicable laws. Must demonstrate and exhibit professional qualities when speaking with employees, whether in a one-on-one scenario or a group setting. Responsibilities will include planning, assigning, and directing work; appraising performance; rewarding and disciplining employees;
addressing complaints and resolving problems.
STRUCTURE FITTER WELDER - $22+ (depending on experience) MUST HAVE FITTER EXPERIENCE
Night Shift – 3 Positions
Ability to lay out, fit, and weld fabricated components to assemble structural forms. Proficient in blueprint reading for layou.t Selects equipment and plans layout, assembly, and welding; a layout, positions, aligns, and fits components together; positions work pieces manually or by using overhead or jib cranes Set up welding machine and welding gun: assemble/disassemble welding tips and its liner, wire feed and voltage, using arc or gas-shielded arc welding equipment. Repairs products by dismantling, straightening, reshaping, and reassembling parts. Operate cutting torch and plasma torch. Operate small saw machine and iron machine for cutting and coping, notching materials. Must pass 2g and 3g weld test. Five-year structural fitting experience
recommended.
STRUCTURE WELDER - $22-& UP (depending on experience)
Day Shift- 1 Position
Night Shift– 2 Positions
Ability to weld fabricated parts of structural metal products in shop, plan sequence of operation and meet quality standards. Obtain specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun; connect cables from welding unit to obtain amperage, voltage, slope, and pulse, as specified by Welding Engineer or Welding Technician and be able to set welding machine wire feed and read blueprints. Must pass 2g and 3g weld test. 2 years welding experience.
STRUCTURE FITTER HELPERS - $19/HR - MUST HAVE A WELDING HELMET & READ A TAPE MEASURE
Day Shift- 2 Positions
Night Shift– 2 Positions
Ability to grind, chip weld splatter, high spot, burr, and rust from surfaces of structure components. Ability to position work pieces manually or by using overhead or jib cranes. Examines and feels surface of work piece for defects. Selects grade of abrasive wheel, disk and die grinder bits according to specification, knowledge of abrasives, and condition of metal, and attaches to grinder. Ability to pull trigger to start power tool and move it over surface of work piece to remove scratches, laminated metal, excess weld material, and burrs. Ability to load trucks. Ability to chip or grind out pits or cracks; replace worn abrasive disks, wheels, and die grinder bits. Must be able to operate a mig welder and fuse to piece of metal.
POWDER COATING PAINTER - $18/hr+ – Must have 6mths previous Industrial Paint experience –
Night Shift- 1 Position-
Abrades surfaces of metal or hard composition objects to remove adhering scale, sand, paint, grease, tar, rust, and dirt, and to impart specified finish. Shovel or pours abrasives such as sand, grit, or shot of specified grade into machine hopper. Read work orders or receive instructions from supervisor regarding painting. Select premixed paints, or mixes required portions of pigment, oil, and thinning and drying substances to prepare paint that matches specified colors. Ability to prep product prior/ post painting. Must be able to use a power spray gun. Must pass Pulmonary Function Test (PFT); must be fitted wear respirator
Precision Grinder $18-$25 hr. M-F 7:00am - 3:30pm - Possibly move to 2nd Shift The precision grinder will be able to operate multiple machines and pieces of equipment throughout the grind shop in order to prepare, or finish, customer parts. It is necessary to follow work instructions and blueprints carefully, especially when tight tolerances or high standards of work are required. Skill and attention to detail are required for this position. Responsibilities
Essential Functions
● Operate some, or all, of the following equipment:
○ Precision Grinders
○ Belt Polishers
○ Hydraulic Press (Straightener)
○ Lathe
○ Mill
○ Drill Press
○ Welding Machines
○ Precision Honing Machine
○ Centerless Grinder
○ Overhead cranes
M-F 7:00am - 3:30pm - Possibly move to 2nd Shift
Industrial Painter/Sandblaster temp to hire positions, pay rate $19.00 + based on work history and experience. (4 years min experience) Days
Industrial insulating cement “Refractory” installers temp to hire positions, pay rate $19.00 + based on work history and experience. (4 years min experience) Days
APPLY IN PERSON WITH RESUME AT:
LLOYD RICHARDS PERSONNEL
4619 S. HARVARD AVE, SUITE 105
TULSA, OK 74135
BRING DRIVERS LICENSE AND SOCIAL SECURITY CARD TO APPLY FROM 9:00AM-3:30PM M-F
918-742-5300