Sr. Maintenance Tech - Machinist

Teijin Automotive Technologies is an innovative and full-service Tier One supplier with a global presence and emphasis in development for lightweight technologies. Teijin Automotive offers employees the opportunity to join a leading edge company within the composite material industry and enjoy the benefits offered by a growing company in North America and internationally.Teijin Automotive Technologies Sarepta facility is seeking a Machinist for fabrication and modification of equipment and tools required to support the companies daily operations.PURPOSE OF POSITION:The primary responsibility of the Maintenance Machinist/Fabrication Technician position is to assist in the performance of the day-to-day tasks of the Maintenance Department.GENERAL FUNCTIONS AND RESPONSIBILITIES:1. Fabricate and/or modify equipment required to support company requirements.2. Responsible for sharpening and replacing dies, punches and inserts in molds, hydra pierces, and punches.3. Obtain pricing on any item required to maintain readiness of department.4. Specify proper material specifications for items required to maintain readiness of department.5. Perform Preventative Maintenance Work Orders as directed by Maintenance/Tooling Manager.6. Diagnose, repair and/or replacement of components on all systems and equipment, including but not limited to Hydraulic Presses, Ovens, Oil Heaters, Assembly Machines, Drill Fixtures, Cooling Tanks, Bonders, Temperature Controllers, Air Compressors, Water and Chiller Cooling Systems.7. Direct and assist in the removal and installation of Mold, Dies, and secondary equipment.8. Direct and assist in the installation of pneumatic, hydraulic, water, and cooling lines and connectors.9. Direct and assist in the cleaning of equipment.10. Give general assistance to all Maintenance Personnel.11. Be available for call out for technical support and repairs after normal working hours.12. It is the responsibility of all maintenance personnel to provide a basic set of tools and tool holder or bag. These tools should be with the technician at all times when performing maintenance functions. The basic set of tools should include, at a minimum, the following:Phillips screw drivers Set of needle nose pliersFlat head screw drivers Tape measureCrescent wrench Diagonal Cutting PliersSet of metric Allen wrenches Flashlight Set of SAE Allen wrenches Small KnifeSet of channel lock pliersRELATIONSHIPS:Reports to: Maintenance Supervisor Supervises: None Internal: All Plant Level Staffing External: Corporate & Plant Facility Staff, Customers, Vendors, Contractors.MEASURES OF PERFORMANCE:Perform the basic skills required in the most professional manner. Follow through on instructions from more senior personnel in completion of their tasks. Assistance to the maintenance group and co-workers in the completion of daily tasks. Support of a team environment Attendance Safety Job knowledge Attitude/Dedication HousekeepingKNOWLEDGE AND SKILLS REQUIRED:1. Must have proven experience in the fabrication of devices, equipment, and systems.2. Must be capable of transforming simple sketches into functional devices.3. Must be capable of sharpening and replacing punches, inserts, and drills.4. Must have experience working with End Mills, Surface grinders, Metal Lathes, Drill Presses, welders, and all other standard fabricating tools.5. Must have experience using Dial Calipers, Micrometers, inside and outside calipers, and other standard measuring equipment.6. Must have a good understanding of metals including their properties, and characteristics.7. Must have a minimum 20 mold set experience as crew leader under direct guidance of Maintenance/Tooling Manager.8. Must have completed all Training courses specified in Maintenance Department Training Matrix for Machinist/Fabrication Technician.9. Must be capable of performing Plant startup and shut down operations.10. Must be capable of sharpening knives, cutters, drills, and blades as required per production requirements.11. Must be capable of changing drills, punches, and cutters on all required equipment.12. Must understand purpose, and format of Maintenance Setup Sheets and Create Instruction Sheets.13. Must understand Manufacturing Work Instruction manuals as they pertain to Tool Setup.14. Must know location and type of all ovens, oil heaters, bonders, and presses used at this facility.15. Must have a complete knowledge of Plant operations and procedures.16. Specific knowledge of Hand Tools and Operation.17. Must hold a valid issued Fork Truck Operators License.18. Must understand and practice all Safety Procedures and policies.19. Must be self motivated.20. Ability to work with Oral and/or Written direction.21. Perform tasks with no direct supervision.22. A working and educational background relevant to responsibilities listed on this job description. Maintain right of determination of individual qualifications and ability to perform duties as stated above. Note: Some qualifications may be waived at the discretion of the Department Manager.SCOPE AND IMPACT OF POSITION RESPONSIBILITIES:This position is key to fabrication of repair and replacement parts for molds and secondary equipment necessary for the production of high quality products for our customers. Ensures that equipment is safe operating condition.PHYSICAL DEMANDS:Excellent health and physical condition required. Jobs require good range of motion involving bending, stooping, reaching, walking, and prolonged standing. Physical requirement of lifting and carrying up to 50 lbs. Personal protective equipment required for particular jobs. Must be able to work in close proximity to high temperature molds and materials (290F- 450F). Knowledge of chemicals specific to job-some exposure to fumes. Good eye, hand and foot coordination. Must have license to operate forklift and have valid driver license.MENTAL/VISUAL:Communication - written/verbal skills, basic computer skills. Ability to work in stressful situations. Ability to recognize and respond to dangerous situations. Good math and documentation skills. Ability to work on own without daily instructions or constant supervision.WORKING CONDITIONS:Will be required to work in plant - factory environment where there is some exposure to noise, dust, glass fibers, fumes and heat. Must adhere to PPE requirements as defined in the safety manual when in the manufacturing area. Maintenance personnel are also required to wear steel-toe foot wear.