Plant IV Curing Setup Tech

The Plant IV Curing Setup Tech will:Set up and make mold changes for Passenger Truck Tire Curing Presses.  Removal and installation of al bladders.  Clean and drill venting in molds.  Make minor adjustments to presses as needed.  Assist spraying and loading of Passenger Tire Presses as necessary.PLT Curing Set up Tech must be able to make mold and bladder changes, install recipes, build and tear down bladders, drilling molds, cleaning of molds in press, and maintain data input.PLT Curing Set up Tech must be able to make minor mechanical adjustments and emergency repairs, chase Scrap, do first tire check and first bag check, squeeze audits, cure cycle audits, and cure temperature audits, and serial changes in molds.PLT Curing Set up Tech will follow all plant policies, environmental policies and plant and departmental safety policies. Must be certified to operate a Fork Life through the Safety Department.PLT Curing Set up Tech must be able to effectively communicate with other set up techs, curing supervision, and curing press operators, and supplying departments.PLT Curing Set up Tech will follow standard practices and perform all work necessary to promptly and accurately obtain quality and quantity production, and keeping work areas neat, clean, and aligned and orderly.Perform other duties as directed by the PLT Curing Supervisor, Lead Supervisor, or Department Manager.Ensure all ESH procedures, policies and legal requirements are implemented and monitored.NOTE: May not be inclusive of all work required and may be updated as needed.